Your Rig Deserves Better

Clean rig. Better performance. Longer life. Not canned air — a micro-turbine air tool.

Clears Compacted Heatsink Buildup

2-in-1: Blow Out Dust. Vacuum It Up.

120,000 RPM — Reaches Between Every Fin

Drop Temps. Restore Performance.

LIMITED TIME OFFER!

Use code HOGA10OFFGIFT to save an additional 10% off!

Charges via USB-C.  Wall plug not included.  

Only 12 units left at this price.
OUT OF STOCK
Restock soon! PREORDER NOW
Hurry! LET BUY NOW

Only 12 units left at this price.

Estimate delivery between May 17 - May 23

Your Temps Are Already Higher Than They Should Be.

This is what's happening inside your build right now — whether you can see it or not.

The Buildup You Can't See Is Doing the Most Damage.

Dust packs between heatsink fins — exactly where airflow needs to pass. You can't see it from the outside. But your temps already know it's there.

 

Fans ramping up earlier. Frame time spikes you'd blame on drivers. Performance that's quietly not what it used to be.

 

It's not the drivers. It's the dust.

Dust Buildup Level

Typical Temp Impact

Likely Effect

Light

(3–6 months)

+3°C to +6°C

Fans a little louder.

Nothing major yet.

Moderate

(6–12 months)

+7°C to +12°C

Slowdowns under heavy use. Fans working harder.

Heavy

(12+ months)

+13°C to +20°C+

Noticeable FPS drops. Loud fans. Your rig is struggling.

You didn't spend that much on your build to run it at 80% because of something a proper clean would fix in ten minutes. 

 

The hardware is fine.

The maintenance is the problem.

PROTECT YOUR RIG ->

Protecting your build means using a tool that's actually up to the job.

Not a Toy. Not a Gimmick.

If you're going to clean your rig properly, the tool needs to be able to do it properly.

Most electric dusters don't generate enough pressure to clear heatsink fins. They move surface dust. The compacted buildup between the fins — where the heat actually lives — stays put.

 

Canned air has the same problem. Strong for two seconds, then gone before you've touched the GPU, the CPU cooler, and the case filters in one session.

 

This one runs a concentrated turbine channel at 120,000 RPM — tight, directional airflow that reaches between fins and dislodges what's actually packed in there

Reaches Between Fins

Consistent Pressure

Full Rig in One Session

Safe for Components

Long-Term Solution

This is what proper PC maintenance actually looks like.
 

One tool. One charge. Every fin, every filter, every crevice — cleared completely. Temps drop. Fans quiet down. Performance comes back.

PROTECT YOUR RIG ->

Your build deserves a proper clean. 

This is the tool that delivers one.

Built to Clear What Canned Air Leaves Behind.

Canned air fades before you finish one component. Cheap electric dusters move surface dust — they don't reach what's packed between fins. 

 

This runs a concentrated brushless turbine channel — directional, high-pressure, consistent from first blast to last.

One session. Every fin cleared. Done.

Their Builds. Their Temps. Their Results. 

PROTECT YOUR RIG ->

Protect the Build.
Skip the Ongoing Cost.

Rechargeable lithium power

Charge and go. No disposables needed.

Brushless motor longevity

No friction. No heat buildup. 

Built to last.

No disposable waste

No cans. No propellant. 

No landfill.

Built for repeat use

Same output on year two as day one.

It’s not a gadget. It’s a permanent upgrade that pays for itself.

30-day guarantee.  If it doesn’t outperform your cans — return it.  No risk. No commitment.

You built something worth protecting.

If you built it — you maintain it properly. 

If you care about performance — you don't cut corners on maintenance.

If you're serious about your rig — you use the right tool.

Your build deserves a proper clean.

Now it has one.

PROTECT YOUR RIG ->

FAQ for the M18 Turbo Fan

A few last questions — answered straight.

Will this actually make a difference to my temps?

Yes — if your temps are elevated due to dust buildup, a proper clean with this will bring them down. Real-world results from verified buyers show drops of 6°C to 13°C after one cleaning session. The hardware was never the problem. The dust was.

What's included in the box? 

The turbo fan, two fan nozzle attachments, a vacuum intake nozzle attachment, and a USB-A to USB-C charging cable. A wall plug is not included — it charges from any standard USB-A or USB-C adapter. If you need one, you can add it at checkout.

Can it actually reach between heatsink fins?

Yes. The concentrated turbine airflow channel maintains high pressure all the way to the nozzle tip — directional and tight enough to penetrate between fins and dislodge compacted buildup, not just surface dust. That's the cleaning canned air can't complete in one session.

Is it safe to use directly on PC components? 

Yes, when used correctly. Keep the nozzle 2–3 inches from components, use short sweeping passes across fins rather than holding it stationary, and work from the inside out so dislodged dust exits the case. No liquid propellant, no chemical discharge — clean, dry airflow only.

Will the battery last through a full rig clean? 

Yes. A full tower — GPU, CPU cooler, case filters, intake fans — on a single charge. Rechargeable via USB-C in under two hours and ready for the next session. No stopping halfway through because the can ran out.

Is it worth it compared to just buying more canned air?

Run the math. Three cans every few months at $8 each is $96 a year — $288 over three years — and your rig still wasn't getting a proper clean. This costs $79. Once. And it actually finishes the job.

What are the full technical specifications?

Core Performance

  • Motor Type: High-efficiency Brushless Micro-Turbine.
  • Max Speed: 120,000 RPM at 65W Turbo Power.
  • Wind Velocity: 40m/s (90mph).
  • Dual-Function: High-velocity outflow (blowing) and integrated vacuum suction (intake).

Force Output (Gram Force)

  • 1st – 5th Gear: 8g / 11g / 14g / 17g / 21g.
  • Turbo Mode: 54g of sustained force.

Power & Battery

  • Battery Cells: Dual 21700 High-Output Lithium Cells.
  • Usage Time: 3.5 Hours (Low) / 30 Minutes (Continuous Turbo).
  • Charging: 2–3 Hours via USB-C (Cable included; wall adapter not included).

Build & Dimensions

  • Weight: 232g ultra-lightweight chassis.
  • Full Length: 14cm.
  • Grip Dimensions: 10 x 5 x 3 cm.
  • Nozzle Dimensions: 7.75cm length | 3.5cm diameter.

Safety & Certification

  • Certifications: CE, FCC, RoHS, KC.
  • Protection: No liquid propellant or chemical discharge—safe for sensitive electronics.

Try It Risk-Free

If you’re not loving hot lunches within 30 days, send it back.  No stress. No awkward emails.

Free Shipping

Secure Payment

30-Day Money Back

PROTECT YOUR RIG ->

Your Build Deserves Better Than a $7 Can

One proper clean. Lower temps. A rig that runs the way it was built to.

Your build deserves better than a half-empty can.

No pressure drop.
No freezing.
No stopping halfway through.

One proper clean. Every time.

PROTECT YOUR RIG TODAY ->

Free Shipping

Quality Assurance

Fast Customer Support

30 Day Money-Back

100+ 5-Stars Reviews